Structural Engineering
Concrete Technology
GUEST LECTURES (EXPERT TALKS)
Ph.D. | VTU, KARNATAKA | 2023 |
M. Tech. | VTU, KARNATAKA | 2001 |
B.E. | Shivaji University, Kolhapur | 1999 |
INTERNATIONAL JOURNAL PUBLICATIONS : Scopus-04, Web of Science-01 & UGC Care – 01
1) Dada S. Patil and S. B. Anadinni, “Self-Curing (Internally Cured) Concrete Using Porous Light Weight Aggregates: A Better Solution for the Sustainable Development”, The Indian Concrete Journal (ICJ), pp. 55-62, July 2019 (Scopus Indexed).
2) Dada S. Patil, S. B. Anadinni and A. V. Shivapur, “Mixture Proportioning and Strength Parameters of M20 Grade and M50 Grade of Self-Curing Concretes Incorporated With Prewetted Sintered Fly Ash Lightweight Aggregates”, VB International Interdisciplinary Research Journal (Special Issue on Emerging Techniques in Interdisciplinary Sciences), ISSN (online): 2319-4979, pp. 1675-1689, October 2021 (Web of Science Indexed).
3) Dada S. Patil and S. B. Anadinni, “Influence of Self-Curing Polymer PEG 400 on Physical Properties of Ordinary Portland Cement”, SSRG, International Journal of Civil Engineering, Volume 8, Issue 8, pp. 15-22, August 2021, DOI: 10.1445/23488352/IJCE-V818P102, ISSN (online): 2348-8352.
4) Dada S. Patil and S. B. Anadinni, “Utilizing Porous Lightweight Aggregates for Self-Curing Concrete: Mechanism and Practical Considerations in Ready-Mixed Concrete Plant”, International Research Journal of Engineering and Technology (IRJET), Volume 6, Issue 2, pp. 2411-2416, February 2019, eISSN: 2395-0056 and pISSN: 2395-0072.
5) Dada S. Patil, S. B. Anadinni and A. V. Shivapur, “Strength Properties of M20 and M50 Grades of PEG 400 Modified Self-Curing Concrete and Analysis Using ANSYS Software”, International Journal of Civil Engineering and Technology (IJCIET), Volume 12, Issue 10, pp. 1-22, October 2021, eISSN: 0976-6216 and pISSN: 0976-6308, DOI- https://doi.org/10.34218/IJCIET.12.10.2021.001 (UGC Care list2).
6) Dada S. Patil, S. B. Anadinni and A. V. Shivapur, “Evaporation, Degree of Hydration, Porosity and Gel/Space Ratio of Self-Curing Polymer PEG 400 Modified Ordinary Portland Cement Paste”, Journal of Applied Science and Engineering, Vol. 26, No. 3, pp. 303-311, June 2022, Taiwan, http://dx.doi.org/10.6180/jase.202303_26(3).0001 (Scopus Indexed).
7) V. V. Karjinni, S. B. Anadinni & Dada S. Patil, “An Investigation on Characteristic Properties of High-Performance Self Compacting Concrete using Mineral Admixture” The Indian Concrete Journal (ICJ), September 2009 (Scopus Indexed).
8) Sayed Mehdi Abbas & Dada S. Patil, “Design & Economic Analysis of Self Compacting Concrete for Mivan Shuttering”, International Journal of Engineering Development & Research (Volume 4, Issue 2, May 2016).
9) Dada S. Patil, “Concrete Mix Design for M35 Grade: Comparison of Indian Standard Codes, IS 10262: 2009 & IS 456: 2000 with American Code, ACI 211.1-91”, International Research Journal of Engineering & Technology (IRJET), Feb. 2019.
10) Dada S. Patil, “A Need to Revise Minimum tensile Steel Area Provision for RC Beams Given in Clause 26.5.1.1 of IS 456: 2000 (Plain & RC Code of Practice) ”, The Indian Concrete Journal (ICJ), pp. 5-9, April 2020 (Scopus Indexed).
11) Dada S. Patil, Dr. S. B. Anadinni & Dr. A. V. Shivapur, ‘Sustainable Development Through the Use of Self-Curing Concrete’, Concrete Construction magazine (NBM & CW media), October 2022 issue.
12) Dr. Dada S. Patil, ‘Self-Curing Concrete: A Positive Step towards a Sustainable Development’, Construction Philosophy magazine, July 2023 issue.
13) Dr. Dada S. Patil & Dr. Fauwaz Parkar ‘A Need of Awareness about Self-Curing (Internally-Cured) Concrete in the Indian Construction Industry’, Journal of International Concrete Construction Technologies (NBM & CW media), November-December 2023 issue.
CONFERENCE PAPERS
1) “An Investigation on Characteristic Properties of High Performance Self Compacting Concrete using Fly Ash” in NCFACE 07 at VLB Janakiammal College of Engineering, Coimbatore on 21st April 2007.
2) “Ground Improvement Techniques” in Technomillennium07 at MIT, Aurangabad on 17th Sept. 2007.
3) “High Performance Concrete in the 21st Century” at Jabalpur Engineering College in a conference Advances in Construction Materials & Equipment (ACME) in Jan. 2008.
4) “Role of Vegetation in Civil Engineering” in NCEEM on 16th Feb. 2008 in TKIET, Warananagar.
5) “Chloride-Induced & Carbonation-Induced Corrosion of RCC Structures” in EPCM08 at Rajasthan Technical University (RTU), Kota on 13th Sept. 2008.
6) “Utilizing Fly Ash: A need of 21st Century” in NCGT08 at Government Polytechnic, Nasik on 10th Nov. 2008.
7) “Vegetation: An Effective Way of Soil Conservation” in International Congress on Environmental Research 08 held on 18, 19 & 20th Dec. 2008 at BITS Pilani, Goa.
8) “Low Cost Housing: Innovative Technologies” at Fr. Agnel Polytechnic, Vashi on 30th October 2009.
9) “Concrete repair Systems: Field Performance” to Institute of Engineers (India), Jodhpur Local Centre for a national level conference on Repairs & Rehabilitation for Sustainable Development RRSS2011 (19th & 20th August 2011).
10) “Pile failure in earthquake: Current understanding, codes of practice & inconsistency in observed pile failure” in NCERNB2013 held on 1st March 2013 at VIT, Virar, Bombay.
11) “Economic evaluation of Geosynthetic-Reinforced Soil Projects: A Brief Review” in an International conference, ICETTA2014 at YTC0EM, Karjat in March 2014.
12) “Performance of RCC Buildings during Earthquake: Effect of Structural Irregularities” in a National Conference at Pillai College, Rasayani in March 2014.
13) “Self-Compacting Concrete for Mivan Shuttering” in an International Conference at Thakur College of Engineering & Technology, Kandivali, in February 2016.
14) “Self-Compacting Concrete for Mivan Shuttering” in a National Conference at Amity University, Panvel, on 26th February 2016.
15) “Construction of Economic Water Treatment Plant by Using Effective Planning & Management Techniques” in a National Conference (Cynosure-16) at PCOE, Nagpur, on 22nd March 2016.
16) “Enhancing the Outcome Based Teaching-Learning Process through Laboratory Session to Impart Critical Thinking to the Learners: Demonstration of Conflicting Results of Various Concrete Workability Tests” in a National Conference NCTIL19 on 8th June 2019 at Nashik.
17) “Enhancing Bloom’s Learning Levels for an Outcome Based Teaching-Learning Process in Geotechnical Engineering: A Case Study of Failed Boiler House” in a National Conference NCTIL19 on 8th June 2019 at Nashik.
18) “A Need of Serious & Professional Approach towards the Site Visits for Civil Engineering Learners for an Effective Teaching-Learning Process in its True Sense” in a National Conference NCTIL19 on 8th June 2019 at Nashik.
19) “Domain Knowledge, Adequate Software Skills & Physical Model Making: A Dire Necessity for the Undergraduate Learners for an Outcome Based Teaching-Learning Process in Structural Engineering” in a National Conference NCTIL19 on 8th June 2019 at Nashik.
20) “Self–Curing Concrete: Use of Polyethylene Glycol 400 as a Self-Curing Agent”, International Conference on Advances in Mechanical and Civil Engineering (IC-AMCE 2020) held at TCET, Mumbai, India, pp.18-24, February 2020, ISBN: 978-1-7323562-7-8.
21) “Computation of Static Modulus of Elasticity and Poisson’s Ratio of M20 Grade Self-Curing Concrete with PEG 400 as a Self-Curing Agent Using IS Code and ASTM Standard”, International Conference on Recent Advances in Computational Techniques (e-IC-RACT 2020, Elsevier BV) held at Amity School of Engineering and Technology, Panvel, Navi Mumbai, India, June 2020, https://ssrn.com/abstract = 3702271.
22) “Static Modulus of Elasticity and Poisson’s Ratio of M50 Grade Self-Curing Concrete Using IS Code and ASTM Standard”, International Conference (Online) on Recent Advances in Civil Engineering for Sustainable Development (RACESD-2021) held at Maulana Azad National Institute of Technology, Bhopal, MP, India, pp. 126, February 2021 (Best Technical Paper Award).
23) “Self-Curing Concrete: A Potential Material for RCC Water Tanks”, International Conference (Online) on Recent Advances in Civil Engineering for Sustainable Development (RACESD-2021) held at Maulana Azad National Institute of Technology, Bhopal, MP, India, pp. 131, February 2021.
24) “An Experimental Investigation on Cohesion and Angle of Internal Friction of Crushed Sand Partially Replaced with Self-Curing Additive Sintered Fly Ash Lightweight Aggregates”, UKIERI Concrete Congress, Sustainable Concrete Infrastructure, 14-17 March, 2023, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, Punjab.
25) “Enhancement of Early Age Strength of Concrete by Using Prewetted Sintered Fly Ash Lightweight Aggregates as Self-Curing Additives” ICCRCBM 2023, , 03-05 March, 2023, NITK, Surtahkal (Best Technical Paper Award).
WORKSHOPS
1) One-week program by IIT Madras, Chennai on “Advanced Earthquake Geotechnical Engineering” under the aegis of NPEEE, from 12-07-2004 to 16-07-2004.
2) Two-week program by IIT Bombay, Mumbai on “Structural Dynamics: Applications to Earthquake Engg.” under the aegis of NPEEE, from 03-07-2006 to 12-07-2006.
3) One-week program by IIT Madras, Chennai on “Durability & its Implications in RCC Design” from 03-01-2008 to 08-01-2008.
4) One-week program by KJSCEIT, Sion, Mumbai on “Effective Teaching: Methods & Approach” from 23-06-2008 to 27-06-2008.
5) One-week program by IIT Bombay, Mumbai on “Advanced Foundation Engineering” from 20-06-2011 to 24-06-2011.
6) A 2-day workshop on Advanced Finite Element Methods: Theory & Applications by Mechanical Department, SVNIT, Surat on 26th & 27th May 2012.
7) Two-week program by ADCET, Ashta (AICTE sponsored) on “Basics of Structural Dynamics & Seismic Design”, from 10-06-2013 to 22-06-2013.
8) One Week program by IIT Madras, Chennai on “Dynamic Analysis of Ocean Structures” in December 2015.
9) One-week program by AIKTC, Panvel (ISTE Approved) on “Application of Primavera, MS-Project, GPS-GIS & Soft Computing Techniques in Civil Engineering”, from 18-01-2016 to 23-01-2016.
10) Three-Day Program titled “A Road Map to NBA” in AIKTC, Panvel in December 2016.
11) Two Day National Seminar on Geotechnical Engineering-2016 (NSGE-2016) (TEQIP-II Sponsored), organized by Applied Mechanics Department SVNIT, Surat & Indian Geotechnical Society, Surat Chapter, during 20-21 August 2016.
12) Three Day Faculty Development Program on Design of Steel Structures by Limit State Method in AIKTC, Panvel, during 20-22 January 2017.
13) One-week program by DBCE, Goa (ISTE Approved) on “Advances in Concrete Technology”, from 19-06-2017 to 23-06-2017.
14) One-week program by Civil Engg. Dept., IIT, Roorkee on “Recent Advances in Fracture & Fatigue”, from 10-07-2017 to 14-07-2017.
15) One-week program by CCE, IISc, Bengaluru on “Fracture Characterization of Concrete Using Non-Destructive Testing Including Acoustic Emission Testing”, from 16-12-2019 to 20-12-2019.
16) Five-Day webinar by SIEM, Nashik on “Civil Engineering Aspects”, from 12-05-2020 to 16-05-2020.
17) Three-Day webinar by AIKTC, Panvel on “e-content development tools & techniques for effective teaching & learning process”, from 19-05-2020 to 21-05-2020.
18) One-week online FDP by PCOE, Nagpur on “Research Methodology Tools & Techniques”, from 29-05-2020 to 02-06-2020.
19) One-week web series (Online) by Ramco Cements Limited on “Analysis & Design of Liquid Retaining Structures”, from 22-06-2020 to 26-06-2020.
20) One-week online short term course by NIT, Punjab on “Emerging trends in Highway Engineering & Infrastructure Development”, from 23-06-2020 to 27-06-2020.
21) Three-day National Conference by CiTeL under IQAC initiative, AIKTC, Panvel on “Innovative Teaching & Exuberant Learning”, from 26-06-2021 t0 28-06-2021.
22) Two-day workshop by Civil Engineering Department, SPCE, Mumbai on “Repair & Retrofitting Technology’, from 11-11-2022 t0 12-11-2022.
23) Twelve-Week online FDP by IIT, Madras on “Admixtures & Special Concretes”, from July 2023 to October 2023.
24) Six-Day ATAL FDP by Fr. Conceicao Rodrigues College of Engineering, Bandra on “Institutional Restructuring & Strengthening Autonomy through NEP”, from 20 November 2023 to 25 November 2023.
25) Five-Day Online STC by Dr. B. R. Ambedkar National Institute of Technology Jalandhar on “Sustainable and Durable Green Concrete-Future and Applications”, from 18 December 2023 to 22 December 2023.
26) Six-Day ISTE approved STTP by Civil Engineering Department, AIKTC, Panvel on “Application of Latest Technologies in Civil Engineering”, from 15 January 2024 to 20 January 2024
COURSE CERTIFCATES
1) NPTEL online certification for 12-week (July – October 2019) course “Advanced Concrete Technology” (IIT Madras, Chennai).
2) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Minimizing and Controlling Concrete Cracking Due to Shrinkage” on 5th May 2020.
3) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Specifying Sustainable Concrete (Print Course)” on 5th May 2020.
4) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Concrete Innovations (Print Course)” on 6th May 2020.
5) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Fundamentals of Concrete (Part 2) – Mix Design and Field Practices (Print Course)” on 6th May 2020.
6) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Innovative Green Concrete for Sustainable Construction” on 6th May 2020.
7) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Concrete Restoration and Repair” on 8th May 2020.
8) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Strength through transparency: how concrete EPDs are driving down carbon footprint (print course)” on 29th July 2020.
9) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Principles of Grout” on 2nd August 2020.
10) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “Improving Designs by Way of Constructability (Print Course)” on 24th April 2021.
11) Certificate from Hanleywood University (AIA Continuing Education Provider), USA for successfully completing the on-demand e-learning course “The Top 10 Ways to Reduce Concrete’s Carbon Footprint (Print Course)” on 7th July 2022.
12) NPTEL online examination certification (Elite) for 12-week (July – October 2023) course “Admixtures & Special Concretes” (IIT Madras, Chennai).
1) Best teacher award at Anjuman-I-Islam head office, CST on 26th January 2018.
2) Certificate of appreciation from Anjuman-I-Islam for carrying out Structural Audits of 9 Anjuman educational institutes.
3) Best technical paper awards in International Conferences at NIT, Bhopal & NITK, Surathkal.
4) Minor research grant of Rs. 30,000 from Mumbai University in the academic year 2015-2016 for the experimental work on Self-Curing concrete.